普通热处理分为退火、正火、淬火和回火.退火是将钢加热到预定温度,保温一定时间后缓慢冷却(通常随炉冷
来源:学生作业帮 编辑:拍题作业网作业帮 分类:综合作业 时间:2024/04/28 19:15:02
普通热处理分为退火、正火、淬火和回火.退火是将钢加热到预定温度,保温一定时间后缓慢冷却(通常随炉冷
不好意思,我怎么一次没发完
接着发
普通热处理分为退火、正火、淬火和回火。
退火是将钢加热到预定温度,保温一定时间后缓慢冷却(通常随炉冷却),获得接近于平衡组织的热处理工艺。
正火是将钢加热到亚共析钢或共析和过共析钢以上30-50℃,保温适当时间后在静止空气中冷却的热处理工艺。
淬火是将钢加热到亚共析钢或AC1以上30-50℃,经过保温后在冷却介质中迅速冷却的热处理工艺。
回火是把经过淬火的零件重新加热到低于AC1的某一温度,适当保温后,冷却到室温的热处理工艺。
不好意思,我怎么一次没发完
接着发
普通热处理分为退火、正火、淬火和回火。
退火是将钢加热到预定温度,保温一定时间后缓慢冷却(通常随炉冷却),获得接近于平衡组织的热处理工艺。
正火是将钢加热到亚共析钢或共析和过共析钢以上30-50℃,保温适当时间后在静止空气中冷却的热处理工艺。
淬火是将钢加热到亚共析钢或AC1以上30-50℃,经过保温后在冷却介质中迅速冷却的热处理工艺。
回火是把经过淬火的零件重新加热到低于AC1的某一温度,适当保温后,冷却到室温的热处理工艺。
给您专业的翻译!
普通热处理分为退火、正火、淬火和回火.
The types of ordinary heat treatment of steel are annealing,normalizing,quenching and tempering.
退火是将钢加热到预定温度,保温一定时间后缓慢冷却(通常随炉冷却),获得接近于平衡组织的热处理工艺.
Annealing is a treatment process of steel by heating to a predetermined temperature,holding for a certain time,and then cooling slowly to room temperature (normally together with the furnace),so that the equilibrium microstructure is obtained.
正火是将钢加热到亚共析钢或共析和过共析钢以上30-50℃,保温适当时间后在静止空气中冷却的热处理工艺.
Normalizing is a treatment process of steel by heating to 30-50℃ above temperature level of hypoeutectoid steel or eutectoid and hyper-eutectoid steel,holding for a suitable time and then cooling in still air.
淬火是将钢加热到亚共析钢或AC1以上30-50℃,经过保温后在冷却介质中迅速冷却的热处理工艺.
Quenching is a treatment process of steel by heating to 30-50℃ above temperature level of hypoeutectoid steel or Ac1 (正确写法是用小写c),it is then rapidly cooled in cooling agent after holding.(据我了解,淬火似乎不需要保温).
回火是把经过淬火的零件重新加热到低于AC1的某一温度,适当保温后,冷却到室温的热处理工艺.
Tempering is a treatment process of steel by reheating the quenched components to a temperature below Ac1,after appropriate holding time,and then cooling to room temperature.
【英语牛人团】
普通热处理分为退火、正火、淬火和回火.
The types of ordinary heat treatment of steel are annealing,normalizing,quenching and tempering.
退火是将钢加热到预定温度,保温一定时间后缓慢冷却(通常随炉冷却),获得接近于平衡组织的热处理工艺.
Annealing is a treatment process of steel by heating to a predetermined temperature,holding for a certain time,and then cooling slowly to room temperature (normally together with the furnace),so that the equilibrium microstructure is obtained.
正火是将钢加热到亚共析钢或共析和过共析钢以上30-50℃,保温适当时间后在静止空气中冷却的热处理工艺.
Normalizing is a treatment process of steel by heating to 30-50℃ above temperature level of hypoeutectoid steel or eutectoid and hyper-eutectoid steel,holding for a suitable time and then cooling in still air.
淬火是将钢加热到亚共析钢或AC1以上30-50℃,经过保温后在冷却介质中迅速冷却的热处理工艺.
Quenching is a treatment process of steel by heating to 30-50℃ above temperature level of hypoeutectoid steel or Ac1 (正确写法是用小写c),it is then rapidly cooled in cooling agent after holding.(据我了解,淬火似乎不需要保温).
回火是把经过淬火的零件重新加热到低于AC1的某一温度,适当保温后,冷却到室温的热处理工艺.
Tempering is a treatment process of steel by reheating the quenched components to a temperature below Ac1,after appropriate holding time,and then cooling to room temperature.
【英语牛人团】
普通热处理分为退火、正火、淬火和回火.退火是将钢加热到预定温度,保温一定时间后缓慢冷却(通常随炉冷
将钢加热到发生相变的温度,保温一定时间,然后缓慢冷却到室温的热处理叫( ).A)退火 B)回火 C)正火
如何计算保温时间热处理加热过程是设备逐渐升温的过程,和装炉量有关,不可控,但请问,热处理的淬火,回火,正火,退火的保温时
退火,正火,淬火,回火加热到什么温度线,分别得到什么组织
什么是退火,淬火,正火,回火?
钢的退火是吧钢件加热到相变温度,保温后缓慢冷却,为什么有细化晶粒的作用?
关于热处理的问题:对45号钢进行热处理.正火;退火;淬火;回火的温度是多少呢?
退火是将钢加热至临界点Ac1以上或以下温度,保温后随炉缓慢冷却以获得近于平衡状态组织的热处理工艺
求退火、正火、淬火、调质、回火的区别和相同点
退火,回火,淬火,正火定义及目的?
奥氏体晶粒度测定我需要对45号钢的本质晶粒度进行测量,加热到930度后应该用哪种热处理工艺(正火,退火,淬火,回火)进行
45号钢经退火、正火、淬火、回火后的组织和性能.