作业帮当水中Mg2+含量低时,以铬黑T作指示剂测定水中Ca2+.Mg2+总量,终点不明.
来源：学生作业帮 编辑：拍题作业网作业帮 分类：英语作业 时间：2024/04/30 00:47:35
当水中Mg2+含量低时,以铬黑T作指示剂测定水中Ca2+.Mg2+总量,终点不明.
常在水样中先加少量MgY2+配合物再用EDTA滴定,终点就敏锐
这样做对测定结果有无影响?说明其原理
常在水样中先加少量MgY2+配合物再用EDTA滴定,终点就敏锐
这样做对测定结果有无影响?说明其原理
In titration of Ca2+,add MgY2- to enhance the color change at the end point.When MgY2- mixes with Ca2+,following reactions happen:
1.MgY2- + Ca2+ -----> Mg2+ + CaY2- (they are all colorless)
2.Mg2+ + Black T -----> red complex
at the end point,in order to eliminate the red color due to the Mg2+_black T complex,additional EDTA is needed to replace black T and to form MgY2-.The amount of EDTA required for this replacement is exactly the same as the amount of Y4- passed to Ca2+ from the initially added MgY2-.So the overall mole number of EDTA is exactly equal to the mole number of Ca2+,and is not impacted by the amount of MgY2- added.
1.MgY2- + Ca2+ -----> Mg2+ + CaY2- (they are all colorless)
2.Mg2+ + Black T -----> red complex
at the end point,in order to eliminate the red color due to the Mg2+_black T complex,additional EDTA is needed to replace black T and to form MgY2-.The amount of EDTA required for this replacement is exactly the same as the amount of Y4- passed to Ca2+ from the initially added MgY2-.So the overall mole number of EDTA is exactly equal to the mole number of Ca2+,and is not impacted by the amount of MgY2- added.
当水中Mg2+含量低时,以铬黑T作指示剂测定水中Ca2+.Mg2+总量,终点不明.
如果试样是Ca2+、Mg2+的混合物,是否可以用铬黑T指示剂从混合物中分别测定含量吗?
用EDTA滴定Ca2+ ,Mg2+总量时,以什么为指示剂,滴定Ca2+时,以什么为指示剂?
用EDTA滴定法测定Fe3+,Al3+,Ca2+,Mg2+混合液中Fe3+,Al3+含量时,如何消除Ca2+,Mg2+的
用EDTA法怎么测定水的总硬度?用什么作指示剂?溶液的PH值应控制在什么范围?如何分别测定Ca2+含量和Mg2+含量
EDTA滴定Mg2+的含量时,以EBT为指示剂,指示剂终点颜色的物质是 A Ca- EBT B Ca-EDTA C EB
铬黑T指示剂在水中的颜色是（）
【络合滴定法测定铝盐中铝的含量】怎样排除Ca2+、Mg2+、Cl- 离子干扰
在pH＝10时,以EDTA为标准溶液,铬黑T为指示剂测定水的总硬度,终点时溶液呈现的颜色是
水中ca2.mg2+的增多会引起水体的富营养化污染,
水硬度测试这是在pH=10的氨性缓冲溶液中,以铬黑T为指示剂,用EDTA标准溶液滴定水中钙镁总量.问题1：如果要将钙镁含
如果只有铬黑T指示剂,能否测定钙离子含量?如何测定?