英语翻译铸造工艺员 1.铸造工艺和工装的设计及跟踪完善； 2.Magma 铸件内在质量模拟； 3.现场铸件工艺及质量的完

英语翻译
铸造工艺员 1.铸造工艺和工装的设计及跟踪完善； 2.Magma 铸件内在质量模拟； 3.现场铸件工艺及质量的完
技术质量副厂长
1．东久自动造型线工艺改进；
2．从铸造工艺角度,实施成本控制.
品管部部长
1．负责TS16949质量体系的建立、运行和改进工作；
2．组织现场降废的分析及改进落实工作；
3．组织成品的检验、验收、质量趋势分析及改进工作.
主要工作业绩
1．2005年,主持并通过了汽车OEM件的量产（负责工艺及Pro/E三维模具设计,Magma模拟,现场工艺文件编写,铸件检验指导及进度跟踪协调等）；
2．2005~2006年,改善了铸造工艺工装的设计流程,使用Pro/E与Magma模拟相结合,减少工艺试制成本,同时使设计流程改为从三维到二维,降低了设计变差；并使用此流程开发了两套汽车支架模具；
3．2006年,设计了东久线和亨特线刹车盘工艺工装设计手册,标准化了设计流程；
4．2007年,改进了瓦分公司单片刹车盘的工艺,提高了工艺出品率及劳动效率；
5．2009年,主持并通过了TS16949质量体系的认证工作,且负责不断完善体系.
具有汽车及液压件铸件产品开发经验；有较强的沟通与协调能力,能对工作进行合理的规划和有效的管理,具有团队合作精神和较好的学习能力.能独立完成铸件产品的开发（包括Pro/E三维设计,二维工艺及模具设计,工艺文件制定及项目跟踪及协调等）.

Members of a casting process. Foundry process and tooling design and tracking improvement; 2. Magma intrinsic quality of casting simulation; 3. Scene technology and quality of the finished castings
Deputy director of technical quality
1. East for a long time automatic molding line process improvement; 2. From the point of casting process, the implementation of cost control.
Minister of Quality Control
1. TS16949 quality system is responsible for the establishment, operation and improvement;
2. Reduction or abolition of the spot analysis and improvement of implementation;
3. Organization finished product testing, inspection, trend analysis and improvement of the quality of work. Main results of
1.2005 years, presided over by the car OEM parts production (responsible for technology and Pro / E three-dimensional mold design, Magma simulation, on-site process documentation, tracking the progress of casting instruction and coordination of inspection, etc.);
2.2005 2006, casting technology and equipment to improve the design process, the use of Pro / E and the combination of Magma simulation to reduce the cost of trial process, while making the design process changed from three to two dimensions, reducing the design variation; and use this process development support two sets of car dies; 3.2006, the design of the East line of a long line and the Hunter design manual brakes technology and equipment, standardization of the design process;
4.2007, the improved branch-watt single brake disc technology, improve casting yield and labor efficiency;
5.2009 years, presided over by the TS16949 quality system certification, and is responsible for continuous improvement system. With motor vehicles and hydraulic casting product development experience; have strong communication and coordination, can work in proper planning and effective management, team spirit and good learning ability. Able to complete the casting product development (including Pro / E three-dimensional design, two-dimensional process and die design, process documentation and project tracking and coordination of development, etc.).