作业帮生物反应工程文献中的英文翻译
来源：学生作业帮 编辑：拍题作业网作业帮 分类：英语作业 时间：2024/05/02 02:11:08
生物反应工程文献中的英文翻译
Once kinetic models have been proposed, it is necessary to check out the sensitivity of these models for two types of bioreactor versus changes in the parameters; basically the influence of some changes in value parameters over kinetic coefficients has been
studied: mmax, KS and KI.
These data are represented in Figs. 10-12. It is possible to see the change in oxidation rate value by a modification of kinetic parameters included in the equation. It is necessary to explain that these data are theoretical in order to check model application. This type of analysis is very useful for simulation of the model at different operating conditions not studied in this work.
Once kinetic models have been proposed, it is necessary to check out the sensitivity of these models for two types of bioreactor versus changes in the parameters; basically the influence of some changes in value parameters over kinetic coefficients has been
studied: mmax, KS and KI.
These data are represented in Figs. 10-12. It is possible to see the change in oxidation rate value by a modification of kinetic parameters included in the equation. It is necessary to explain that these data are theoretical in order to check model application. This type of analysis is very useful for simulation of the model at different operating conditions not studied in this work.
一旦动力学模型被提出来,有必要检测这些模型在两种类型的生物反应器中相对于参数改变的灵敏性.基本上,一些参数改变对动力学系数的影响已经得到研究.
这些数据显示在图10-12.从等式中可以看到,通过修正动力学参数可以改变氧化速率.为了检验模型的应用性,有必要解释这些数据是理论上的.这种分析对于这些模型在非工作状态的不同操作条件下的模拟非常有益.
这些数据显示在图10-12.从等式中可以看到,通过修正动力学参数可以改变氧化速率.为了检验模型的应用性,有必要解释这些数据是理论上的.这种分析对于这些模型在非工作状态的不同操作条件下的模拟非常有益.