英语翻译13.Connect the Gantry control panel cable to the inner g

来源：学生作业帮编辑：拍题作业网作业帮分类：英语作业时间：2024/04/28 22:59:08

英语翻译
13.Connect the Gantry control panel cable to the inner gantry display board (SDS BD CN1).
14.Verify that the Jumper plug of the FCV BD Assy is installed between 0-1 pins.
15.Remove the four screw caps from the sides of the rear cover.
16.To install the service angles to the rear cover,repeat steps 9 to 11 (Front Cover Removal).
17.Slightly disengage the rear cover and disconnect the Gantry control panel cables from the following connectors
of the RCV BD Assy of the rear cover.

13、将龙门控制面板连接线连接到内部的龙门显示板（屋宇署CN1的特别职务队）.
14、验证屋宇署的燃料电池汽车的组装跳线插头被安装在0-1针之间.
15、从后盖侧面取出四个螺丝帽.
16、设置后盖的服务角度,重复步骤9到11（封面删除）.
17、稍微松开后盖并且将龙门控制面板连接线和其后面的屋宇署连接器组装的垃圾车后盖的连接器断开.

英语翻译The ends of each cable core and allsecondary panel wirin 英语翻译Point 1:Wrong Front panel screwed to the side panel from 英语翻译Machine-control applications such as a gantry crane auto 英语翻译Because the information required to connect to different The attempt to connect timed failed to connect the dots. control panel connect the 英语翻译whether we really have 5 captured threads on the cable g please connect the m_______ to the computer 英语翻译The only inner packaging should be the packaging to make unable to connect to the login server