在pads中对地铺铜时,有以下提示生成,
来源:学生作业帮 编辑:拍题作业网作业帮 分类:数学作业 时间:2024/03/29 14:16:35
在pads中对地铺铜时,有以下提示生成,
Drilled pads with Nondrilled pads with
less than 50% thermal extensions less than 50% thermal extensions
Report of Thermal Spokes Generator.
On Bottom:
(17.67,4.32) # = 1
Total Drilled pads:1 Total Nondrilled pads:0
Drilled pads with Nondrilled pads with
less than 50% thermal extensions less than 50% thermal extensions
Report of Thermal Spokes Generator.
On Bottom:
(17.67,4.32) # = 1
Total Drilled pads:1 Total Nondrilled pads:0
覆网格形铜皮可能出现的提示,指同网络焊盘与覆铜的连接不完全.比如,一个接地焊盘可能接地的方向有3个,但实际由于其它走线防碍等原因,只有1边与地铜产生连接,就会出现这个提示.覆全铜时无此现象.
(17.67,4.32) # = 1 表示该焊盘的坐标,数量为1,在底层,是有孔盘.
这个提示对PCB无影响,可以不理会.
(17.67,4.32) # = 1 表示该焊盘的坐标,数量为1,在底层,是有孔盘.
这个提示对PCB无影响,可以不理会.
在PADS中如何做元件封装
PADS如何在PCB板上生成元件封装库
在PADS Logic导入到PADS layout中,怎么把layout中元件分类
在用PADS软件如何将DXP格式文件1:1地导入PADS LAYOUT中
PADS 2007 在PADS 2007 中 如何保存铺好铜的文件.
在pads layout中怎样显示或隐藏铺铜的效果
在PADS Layout中怎样打印出通孔焊盘的孔径?
在PADS中增加元件,找不到Part Type!
PADS打开时提示Licensing erroe the system data appears to have bee
PADS Layout提示这样的错误是什么意思?
汽车中 Front Pads是什么
请问PADS中如何在一个层中铺两块铜皮?就是一块大铜的里面在铺一块小铜皮?