英语翻译机械产品的使用性能的提高和使用寿命的增加与组成产品的零件加工质量密切相关,零件的加工质量是保证产品质量基础.衡量
来源:学生作业帮 编辑:拍题作业网作业帮 分类:英语作业 时间:2024/04/29 15:55:55
英语翻译
机械产品的使用性能的提高和使用寿命的增加与组成产品的零件加工质量密切相关,零件的加工质量是保证产品质量基础.衡量零件加工质量好坏的主要指标有:加工精度和表面粗糙度.本文主要通过对影响零件表面粗糙度的因素、零件表面层的物理力学性能、表面质量影响零件使用性能等因素的分析和研究,来提高机械加工表面质量的工艺措施.
机械产品的使用性能的提高和使用寿命的增加与组成产品的零件加工质量密切相关,零件的加工质量是保证产品质量基础.衡量零件加工质量好坏的主要指标有:加工精度和表面粗糙度.本文主要通过对影响零件表面粗糙度的因素、零件表面层的物理力学性能、表面质量影响零件使用性能等因素的分析和研究,来提高机械加工表面质量的工艺措施.
Influence of machining surface quality factors and measures
Mechanical products,improve the use of performance and the service life are increased with the composition of the product parts processing quality is closely related to,the machining quality is the guarantee of product quality based on.Measurement of machining quality are the key indicators:the machining accuracy and surface roughness.This article mainly through the influence of the part surface roughness factors,parts of the surface layer of physical and mechanical properties,surface quality of service performance of the parts of factors such as the analysis and research,to improve the quality of surface machining process measures.
Mechanical products,improve the use of performance and the service life are increased with the composition of the product parts processing quality is closely related to,the machining quality is the guarantee of product quality based on.Measurement of machining quality are the key indicators:the machining accuracy and surface roughness.This article mainly through the influence of the part surface roughness factors,parts of the surface layer of physical and mechanical properties,surface quality of service performance of the parts of factors such as the analysis and research,to improve the quality of surface machining process measures.
零件的机械加工质量包括哪些内容?
王师傅加工一批零件,合格的产品数与不合格的产品数的比是17:3,求这批产品的合格率.
典型零件的机械加工工艺
加工零件图和零件的加工工艺流程
引起机械加工零件加工误差的因素有哪些?
徒弟小王加工了420个零件,废品率是5%,小王加工的合格产品有多少个?
铸造过程中的宏观偏析与微观偏析?铸造产品和加工产品的组织性能区别?
怎样提高机械加工车间员工的质量意识
某工厂加工一批零件,合格率是98%,乙知合格产品比不合格产品多9024个,这批零件的合格产品有多少个?
王师傅加工一批零件,第一天加工的零件个数与零件总数的比是1:3,如果再加工30个零件,剩下的零件个数就和加工完的零件个数
做铝合金零件加工(产品)的,余量XY40,Z20.开粗时用16的粗铣刀,
在决定零件的结构与加工方法时,为什么要结合产品的批量考虑.试举例.