作业帮英语翻译高手帮忙,感激不尽~~~急急急!
来源：学生作业帮 编辑：拍题作业网作业帮 分类：英语作业 时间：2024/04/30 20:40:17
英语翻译高手帮忙,感激不尽~~~急急急!
1. Lanterns shall be of sound and robust construction to BS EN 60598-2-3
2.No control gear other than the ignitor shall be contained inside the luminaire, except for soffit lanterns, gantry sign and directional signs.
3. Labels as required by the above Standard, shall be securely affixed inside the
lantern body. These shall include the mark of origin, model number, rated voltage,
rated wattage of lamp, I.P. rating and terminal markings etc
4.The following maximum lantern weight and lantern windage area shall be met in
order to match the wind loading of the corresponding lighting columns.
5.Lantern Type Lantern Weight Lantern Windage Area
6.Lantern weight should include the total weight of lantern itself, ignitor and
other necessary wiring and components
7.Lantern windage area should have the shape coefficient applied to it.
8.Safety sling made of insulated steel wire of minimum 2 mm diameter shall be
applied for installation of all types of new lanterns in accordance with the
Drawings.
9.Lantern body shall generally be made of structurally robust, dimensionally stable
and durable materials and be resistant to oxidation and corrosion. The frame
/canopy shall be made of die cast aluminium for type 1 lanterns with optional
colours.
10.All hinges, toggle catches, fixing clips and screws shall be of stainless steel and be
fastened to the lantern body securely so that they can sustain the frequent
maintenance operations.
1. Lanterns shall be of sound and robust construction to BS EN 60598-2-3
2.No control gear other than the ignitor shall be contained inside the luminaire, except for soffit lanterns, gantry sign and directional signs.
3. Labels as required by the above Standard, shall be securely affixed inside the
lantern body. These shall include the mark of origin, model number, rated voltage,
rated wattage of lamp, I.P. rating and terminal markings etc
4.The following maximum lantern weight and lantern windage area shall be met in
order to match the wind loading of the corresponding lighting columns.
5.Lantern Type Lantern Weight Lantern Windage Area
6.Lantern weight should include the total weight of lantern itself, ignitor and
other necessary wiring and components
7.Lantern windage area should have the shape coefficient applied to it.
8.Safety sling made of insulated steel wire of minimum 2 mm diameter shall be
applied for installation of all types of new lanterns in accordance with the
Drawings.
9.Lantern body shall generally be made of structurally robust, dimensionally stable
and durable materials and be resistant to oxidation and corrosion. The frame
/canopy shall be made of die cast aluminium for type 1 lanterns with optional
colours.
10.All hinges, toggle catches, fixing clips and screws shall be of stainless steel and be
fastened to the lantern body securely so that they can sustain the frequent
maintenance operations.
Lanterns shall be of sound and robust construction to BS EN 60598-2-3
灯笼必须结实稳固,结构符合 BS EN 60598-2-3
2.No control gear other than the ignitor shall be contained inside the luminaire,except for soffit lanterns,gantry sign and directional signs.
除点火器,灯笼下表面的标志和指示标志、以外灯具里面不应该有其他操纵装置
3.Labels as required by the above Standard,shall be securely affixed inside the
lantern body.These shall include the mark of origin,model number,rated voltage,
rated wattage of lamp,I.P.rating and terminal markings etc
所需的符合上述标准标签应该牢固的粘贴在灯笼内部,这些标签应该包括原产地标签,产品型号,额定电压,额定功率的电灯泡,I.P.等级和终端标志（后面几个可能不太准确)
4.The following maximum lantern weight and lantern windage area shall be met in
order to match the wind loading of the corresponding lighting columns.
下述最大灯笼重量和偏差范围应该和相应的照明项目的风荷载（偏差负荷?这一句我也不懂）一致
Lantern Type Lantern Weight Lantern Windage Area
灯笼类型,灯笼重量,灯笼偏差范围
6.Lantern weight should include the total weight of lantern itself,ignitor and
other necessary wiring and components
灯笼重量应该包括灯笼本身的重量,点火器的重量及其所需的电线和零部件的重量
Lantern windage area should have the shape coefficient applied to it.
灯笼的偏差范围必须有相应的形状系数衡量
8.Safety sling made of insulated steel wire of minimum 2 mm diameter shall be
applied for installation of all types of new lanterns in accordance with the
Drawings.
应使用符合国家和公司设计标准的最小直径为2mm的绝缘钢丝绳作为所有型号的新灯笼安全吊索.
9.Lantern body shall generally be made of structurally robust,dimensionally stable
and durable materials and be resistant to oxidation and corrosion.The frame
/canopy shall be made of die cast aluminium for type 1 lanterns with optional
Colours.
必须保证灯笼主体的制造结构坚固,尺寸稳定,并且使用耐用材料制造,抗氧化、抗腐蚀.
1类型的灯笼框架和顶盖用压铸铝制造,颜色可选.
10.All hinges,toggle catches,fixing clips and screws shall be of stainless steel and be
fastened to the lantern body securely so that they can sustain the frequent
maintenance operations.
使用的所有合页,开关,钉子,固定夹和螺丝必须是不锈钢材质,并且牢固安全的安装在灯笼上以便多次维修操作.
能力有限只能翻译成这样了~
再问： 可以不翻成灯笼 而翻成灯罩吗
再答： lanterns灯笼的意思比较常见，也可以是灯具。我对这个不太了解。
灯笼必须结实稳固,结构符合 BS EN 60598-2-3
2.No control gear other than the ignitor shall be contained inside the luminaire,except for soffit lanterns,gantry sign and directional signs.
除点火器,灯笼下表面的标志和指示标志、以外灯具里面不应该有其他操纵装置
3.Labels as required by the above Standard,shall be securely affixed inside the
lantern body.These shall include the mark of origin,model number,rated voltage,
rated wattage of lamp,I.P.rating and terminal markings etc
所需的符合上述标准标签应该牢固的粘贴在灯笼内部,这些标签应该包括原产地标签,产品型号,额定电压,额定功率的电灯泡,I.P.等级和终端标志（后面几个可能不太准确)
4.The following maximum lantern weight and lantern windage area shall be met in
order to match the wind loading of the corresponding lighting columns.
下述最大灯笼重量和偏差范围应该和相应的照明项目的风荷载（偏差负荷?这一句我也不懂）一致
Lantern Type Lantern Weight Lantern Windage Area
灯笼类型,灯笼重量,灯笼偏差范围
6.Lantern weight should include the total weight of lantern itself,ignitor and
other necessary wiring and components
灯笼重量应该包括灯笼本身的重量,点火器的重量及其所需的电线和零部件的重量
Lantern windage area should have the shape coefficient applied to it.
灯笼的偏差范围必须有相应的形状系数衡量
8.Safety sling made of insulated steel wire of minimum 2 mm diameter shall be
applied for installation of all types of new lanterns in accordance with the
Drawings.
应使用符合国家和公司设计标准的最小直径为2mm的绝缘钢丝绳作为所有型号的新灯笼安全吊索.
9.Lantern body shall generally be made of structurally robust,dimensionally stable
and durable materials and be resistant to oxidation and corrosion.The frame
/canopy shall be made of die cast aluminium for type 1 lanterns with optional
Colours.
必须保证灯笼主体的制造结构坚固,尺寸稳定,并且使用耐用材料制造,抗氧化、抗腐蚀.
1类型的灯笼框架和顶盖用压铸铝制造,颜色可选.
10.All hinges,toggle catches,fixing clips and screws shall be of stainless steel and be
fastened to the lantern body securely so that they can sustain the frequent
maintenance operations.
使用的所有合页,开关,钉子,固定夹和螺丝必须是不锈钢材质,并且牢固安全的安装在灯笼上以便多次维修操作.
能力有限只能翻译成这样了~
再问： 可以不翻成灯笼 而翻成灯罩吗
再答： lanterns灯笼的意思比较常见，也可以是灯具。我对这个不太了解。